x1 BWoody intake tube
(Color may vary) x1 Custom 5" filter
x2 Worm gear hose clamps
x1 Reducing silicone coupler
Flow bench results:
OEM intake - 1239.7 CFM @ 28" of water
BWoody Velocity Plus intake with dry charger - 1892.6 CFM @ 28" of water
BWoody Gain - 652.9 CFM!!!!!!!!!!!
Our IAT MAP Harness is used to prevent an intake over temperature code.
This code has been reported by customers whom reside in warmer areas of the country. (Dry heat)
IAT Harness retails $89.95 - Original purchasers of this intake can call to order harness seperately if needed.
Ram Air Shield:
Designed so that the opening at the front of the shield will capture the incoming cool air while the angled side towards the rear of the shield will help evactuate hot air downward from your engine bay.
Effecively lowering IATs approximately 2-4 degrees under normal driving conditions.
Shields available in Wrinkle Black only
Standard colors are silver and wrinkle black, couplers are black.
If you wish to have a custom color please choose in the drop down boxes below.
NOTE: Anodized colors / Two stage colors tend to have heavy coating on flat surfaces.
*** We Do Not Color Match, Please review colors by clicking the link below ***
To view colors on actual parts click HERE
To view the filter cleaning kit click HERE.
WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Lead which are known to the State Of California to cause cancer; birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov - this item is not carb compliant.
Due to demand, this item may take 1-3 weeks to ship.
NOTE: May require a custom tune for optimal performance gains. // Disclaimer: This product is for intended for off road use only. Powdercoating Colors:
Please Select... Wrinkle Black
Bright Red / Gloss Red (+$10.00)
Flat Black (+$10.00)
Super Gloss Black (+$10.00)
Super Gloss Yellow (+$10.00)
Super Gloss White (+$15.00)
Silver w/ Clear Coat (+$15.00)
Mopar Blue (+$15.00)
Mopar Orange (+$15.00)
Lime Green *NOT SUBLIME* (+$10.00)
COLORS ARE NOT A MATCH FOR OE PAINT
Please Select... Worm Gear Clamps
T-Bolt Clamps (+$25.00)
Drycharger Filter Wrap
Please Select... No Thanks
IAT MAP Harness
Please Select... Yes (+$60.00)
Ram Air Shield
Please Select... No Thanks
Yes - BWP Logo (+$95.00)
Yes - BWP Logo + Hawk (+$120.00)
Yes - Hawk (+$95.00)
Yes - NO LOGO (+$120.00)
Shield Back Plate Color
Please Select... No Shield / No Logo
Anodized Red (+$10.00)
Metallic Anodized Grape (+$15.00)
Please Select... 5-10 Business Days